← Archief yahoo! 2005 · Home

Baisc dinamo vraagje...

Baisc dinamo vraagje...

"J.A. Korten" <johan_korten@solcon.nl> · 2009-11-03 00:13 UTC

Original sent date : Mon Sep 19 15:23:03 CEST 2005
<html><body>

<tt>
Ik heb net gewaagd om mijn print maar eens aan de voiding en pc te hangen,<BR>
so far so good.<BR>
<BR>
Ik gebruik op dit moment een RM51 en een OM32 om een voorraadje LED's aan te<BR>
sturen.<BR>
<BR>
Ik heb een LEDje aan de eerste uitgang en pwr van de OM32 gehangen. Ik krijg<BR>
communicatie (rode led aan, groene af en toe als ik commando zend rev 2.2)<BR>
met de RM51 en alles lijkt goed te gaan.<BR>
Ik heb van de dinamogroep het tooltje van Leon gedownload en probeer dat<BR>
ledje aan te krijgen, maar vooralsnog zonder resultaat.<BR>
Kan iemand tips geven?<BR>
<BR>
Groeten Johan Korten<BR>
<BR>
-----Oorspronkelijk bericht-----<BR>
Van: dinamousers@yahoogroups.com mailto:dinamousers@yahoogroups.com Namens<BR>
Leon van Perlo<BR>
Verzonden: zondag 18 september 2005 21:22<BR>
Aan: dinamousers@yahoogroups.com<BR>
Onderwerp: Re: dinamousers RAIL2005<BR>
<BR>
Ok, dank voor jullie reacties.<BR>
<BR>
Zaterdag 24 september: Paul Salomons<BR>
Zondag 25 september: Frans Staal<BR>
<BR>
Jullie waren de snelsten ;-)<BR>
Ik mail jullie prive wel even de verdere details.<BR>
<BR>
Met vriendelijke groeten,<BR>
Leon<BR>
<BR>
> DINAMO staat weer op RAIL (volgend weekend!).<BR>
> Het is allemaal een beetje laat geregeld vanwege wat perikelen rondom<BR>
> een andere exposant, wellicht hebben jullie daar wel het een en ander<BR>
> van meegekregen. Enfin. Ondanks de korte voorbereiding heb ik toch maar<BR>
> besloten op het verzoek/aanbod van RAIL in te gaan en weer wat te laten<BR>
> zien.<BR>
><BR>
> Ik zou op de stand nog plaats hebben voor 1 extra bemanningslid. Als<BR>
> gebruikers van het Dinamo systeem gun ik jullie uiteraard graag die eer<BR>
> ;-) Voor de goede orde: Het is niet noodzakelijk de hele dag op de stand<BR>
> te hangen. We zijn met 1 extra man met z'n drieen, dus er is ook<BR>
> voldoende gelegenheid om de beurs te bekijken, alleen zou het fijn zijn<BR>
> als je op de drukke momenten wat bezoekers te woord kunt staan en e.e.a.<BR>
> een beetje in de gaten kunt houden.<BR>
><BR>
> Als er iemand is die graag 1 of 2 dagen RAIL meemaakt op deze manier,<BR>
> laat dat even weten. Als er meerdere gegadigden zijn opteer ik voor 1<BR>
> dag p.p. Verder stel ik voor first come, first served.<BR>
> Als ik voor dinsdag geen reacties heb ga ik een andere optie inzetten<BR>
> (geen dreigement, maar ik moet toch wat regelen).<BR>
><BR>
> Met vriendelijke groeten,<BR>
> Leon<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
To unsubscribe from this group, send an email to:<BR>
mailto://dinamousers-unsubscribe@yahoogroups.com<BR>
<BR>
<BR>
Yahoo! Groups Links<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
</tt>

<! |**|begin egp html banner|**| >

<br><br>
<tt>
To unsubscribe from this group, send an email to:<BR>
mailto://dinamousers-unsubscribe@yahoogroups.com<BR>
<BR>
</tt>
<br><br>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br><br>
<div style="width:500px; text-align:right; margin-bottom:1px; color:#909090;">
<tt>SPONSORED LINKS</tt>
</div>
<table bgcolor=#e0ecee cellspacing="13" cellpadding="0" width=500px>
<tr valign=top>
<td style="width:25%;">
<tt>Lionel model train</tt>
</td>
<td style="width:25%;">
<tt>European model trains</tt>
</td>
<td style="width:25%;">
<tt>Model trains</tt>
</td>
</tr>
<tr valign=top>
<td style="width:25%;">
<tt>Model railroads</tt>
</td>
<td style="width:25%;">
<tt>Ho scale model train</tt>
</td>
<td style="width:25%;">
<tt>Model train n scale</tt>
</td>
</tr>
</tr>
</table>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
<tt>YAHOO! GROUPS LINKS</tt>
</div>
<br>
<ul>
<tt><li type=square> Visit your group "dinamousers" on the web.<br> </tt>
<tt><li type=square> To unsubscribe from this group, send an email to:<br> dinamousers-unsubscribe@yahoogroups.com<br> </tt>
<tt><li type=square> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.</tt>
</ul>
<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
</div>
</br>

<! |**|end egp html banner|**| >

</body></html>

Baisc dinamo vraagje...

jahoojoop <johan_korten@solcon.nl> · 2009-11-03 00:13 UTC

Original sent date : Mon Sep 19 15:25:18 CEST 2005
<html><body>

<tt>
Oohw ja, ik probeer het voor elkaar te krijgen met<BR>
      DinamoUsers21.zip <BR>
<BR>
Groeten Johan<BR>
<BR>
--- In dinamousers@yahoogroups.com, "J.A. Korten" <johan_korten@s...><BR>
wrote:<BR>
> Ik heb net gewaagd om mijn print maar eens aan de voiding en pc te<BR>
hangen,<BR>
> so far so good.<BR>
> <BR>
> Ik gebruik op dit moment een RM51 en een OM32 om een voorraadje<BR>
LED's aan te<BR>
> sturen.<BR>
> <BR>
> Ik heb een LEDje aan de eerste uitgang en pwr van de OM32 gehangen.<BR>
Ik krijg<BR>
> communicatie (rode led aan, groene af en toe als ik commando zend<BR>
rev 2.2)<BR>
> met de RM51 en alles lijkt goed te gaan.<BR>
> Ik heb van de dinamogroep het tooltje van Leon gedownload en probeer dat<BR>
> ledje aan te krijgen, maar vooralsnog zonder resultaat.<BR>
> Kan iemand tips geven?<BR>
> <BR>
> Groeten Johan Korten<BR>
> <BR>
<BR>
<BR>
<BR>
</tt>

<! |**|begin egp html banner|**| >

<br><br>
<tt>
To unsubscribe from this group, send an email to:<BR>
mailto://dinamousers-unsubscribe@yahoogroups.com<BR>
<BR>
</tt>
<br><br>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
<tt>YAHOO! GROUPS LINKS</tt>
</div>
<br>
<ul>
<tt><li type=square> Visit your group "dinamousers" on the web.<br> </tt>
<tt><li type=square> To unsubscribe from this group, send an email to:<br> dinamousers-unsubscribe@yahoogroups.com<br> </tt>
<tt><li type=square> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.</tt>
</ul>
<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
</div>
</br>

<! |**|end egp html banner|**| >

</body></html>

Baisc dinamo vraagje...

lvperlo · 2009-11-03 00:13 UTC

Original sent date : Thu Sep 22 08:36:07 CEST 2005
<html><body>

<tt>
Hallo Johan,<BR>
<BR>
> - communicatie is op de OM32 ingesteld op TTL<BR>
> - Voor zo ver ik kan zien zijn de verbindingen naar de OM32 in<BR>
> overeenstemming met de handleiding.<BR>
> - ik heb inmiddels een en ander ook met koploper geprobeerd...<BR>
<BR>
Heb je de laatste versie van de handleiding OM32 SDIM (1.3 30 januari 2005)?<BR>
In een oudere versie stond namelijk een fout bij het aansluitschema.<BR>
De OM32 receive lijn moet in elk geval op pin 2 van K3<BR>
<BR>
Leon<BR>
<BR>
</tt>

<! |**|begin egp html banner|**| >

<br><br>
<tt>
To unsubscribe from this group, send an email to:<BR>
mailto://dinamousers-unsubscribe@yahoogroups.com<BR>
<BR>
</tt>
<br><br>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br><br>
<div style="width:500px; text-align:right; margin-bottom:1px; color:#909090;">
<tt>SPONSORED LINKS</tt>
</div>
<table bgcolor=#e0ecee cellspacing="13" cellpadding="0" width=500px>
<tr valign=top>
<td style="width:25%;">
<tt>Lionel model train</tt>
</td>
<td style="width:25%;">
<tt>European model trains</tt>
</td>
<td style="width:25%;">
<tt>Model trains</tt>
</td>
</tr>
<tr valign=top>
<td style="width:25%;">
<tt>Model railroads</tt>
</td>
<td style="width:25%;">
<tt>Ho scale model train</tt>
</td>
<td style="width:25%;">
<tt>Model train n scale</tt>
</td>
</tr>
</tr>
</table>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
<tt>YAHOO! GROUPS LINKS</tt>
</div>
<br>
<ul>
<tt><li type=square> Visit your group "dinamousers" on the web.<br> </tt>
<tt><li type=square> To unsubscribe from this group, send an email to:<br> dinamousers-unsubscribe@yahoogroups.com<br> </tt>
<tt><li type=square> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.</tt>
</ul>
<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
</div>
</br>

<! |**|end egp html banner|**| >

</body></html>

Baisc dinamo vraagje...

"J.A. Korten" <johan_korten@solcon.nl> · 2009-11-03 00:13 UTC

Original sent date : Mon Sep 19 16:06:01 CEST 2005
<html><body>

<tt>
Sorry voor de spam, maar nog ff een update met meer info:<BR>
<BR>
- communicatie is op de OM32 ingesteld op TTL<BR>
- Voor zo ver ik kan zien zijn de verbindingen naar de OM32 in<BR>
overeenstemming met de handleiding.<BR>
- ik heb inmiddels een en ander ook met koploper geprobeerd...<BR>
<BR>
Groeten Johan<BR>
<BR>
-----Oorspronkelijk bericht-----<BR>
Van: dinamousers@yahoogroups.com mailto:dinamousers@yahoogroups.com Namens<BR>
jahoojoop<BR>
Verzonden: maandag 19 september 2005 15:25<BR>
Aan: dinamousers@yahoogroups.com<BR>
Onderwerp: dinamousers Re: Baisc dinamo vraagje...<BR>
<BR>
Oohw ja, ik probeer het voor elkaar te krijgen met<BR>
      DinamoUsers21.zip <BR>
<BR>
Groeten Johan<BR>
<BR>
--- In dinamousers@yahoogroups.com, "J.A. Korten" <johan_korten@s...><BR>
wrote:<BR>
> Ik heb net gewaagd om mijn print maar eens aan de voiding en pc te<BR>
hangen,<BR>
> so far so good.<BR>
> <BR>
> Ik gebruik op dit moment een RM51 en een OM32 om een voorraadje<BR>
LED's aan te<BR>
> sturen.<BR>
> <BR>
> Ik heb een LEDje aan de eerste uitgang en pwr van de OM32 gehangen.<BR>
Ik krijg<BR>
> communicatie (rode led aan, groene af en toe als ik commando zend<BR>
rev 2.2)<BR>
> met de RM51 en alles lijkt goed te gaan.<BR>
> Ik heb van de dinamogroep het tooltje van Leon gedownload en probeer dat<BR>
> ledje aan te krijgen, maar vooralsnog zonder resultaat.<BR>
> Kan iemand tips geven?<BR>
> <BR>
> Groeten Johan Korten<BR>
> <BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
To unsubscribe from this group, send an email to:<BR>
mailto://dinamousers-unsubscribe@yahoogroups.com<BR>
<BR>
<BR>
Yahoo! Groups Links<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
</tt>

<! |**|begin egp html banner|**| >

<br><br>
<tt>
To unsubscribe from this group, send an email to:<BR>
mailto://dinamousers-unsubscribe@yahoogroups.com<BR>
<BR>
</tt>
<br><br>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br><br>
<div style="width:500px; text-align:right; margin-bottom:1px; color:#909090;">
<tt>SPONSORED LINKS</tt>
</div>
<table bgcolor=#e0ecee cellspacing="13" cellpadding="0" width=500px>
<tr valign=top>
<td style="width:25%;">
<tt>Lionel model train</tt>
</td>
<td style="width:25%;">
<tt>European model trains</tt>
</td>
<td style="width:25%;">
<tt>Model trains</tt>
</td>
</tr>
<tr valign=top>
<td style="width:25%;">
<tt>Model railroads</tt>
</td>
<td style="width:25%;">
<tt>Ho scale model train</tt>
</td>
<td style="width:25%;">
<tt>Model train n scale</tt>
</td>
</tr>
</tr>
</table>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
<tt>YAHOO! GROUPS LINKS</tt>
</div>
<br>
<ul>
<tt><li type=square> Visit your group "dinamousers" on the web.<br> </tt>
<tt><li type=square> To unsubscribe from this group, send an email to:<br> dinamousers-unsubscribe@yahoogroups.com<br> </tt>
<tt><li type=square> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.</tt>
</ul>
<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
</div>
</br>

<! |**|end egp html banner|**| >

</body></html>

Baisc dinamo vraagje...

"J.A. Korten" <johan_korten@solcon.nl> · 2009-11-03 00:13 UTC

Original sent date : Thu Sep 22 10:07:38 CEST 2005
<html><body>

<tt>
Beste Leon,<BR>
<BR>
Ik gebruik de juiste handleiding. Echter doe ik het via de oplossing op pag<BR>
8. Ik gebruik k3 dus niet maar K1. CPU zit er op, de Max232 zit er niet op,<BR>
geen jumpers op JP3, geen kabel op K2 (K2 is zelfs niet vast gesoldeerd).<BR>
<BR>
Hoe zou ik het beste kunnen doormeten waar waarschijnlijk de fout zit? <BR>
<BR>
Groeten Johan<BR>
<BR>
-----Oorspronkelijk bericht-----<BR>
Van: dinamousers@yahoogroups.com mailto:dinamousers@yahoogroups.com Namens<BR>
Leon van Perlo<BR>
Verzonden: donderdag 22 september 2005 8:36<BR>
Aan: dinamousers@yahoogroups.com<BR>
Onderwerp: Re: dinamousers Re: Baisc dinamo vraagje...<BR>
<BR>
Hallo Johan,<BR>
<BR>
> - communicatie is op de OM32 ingesteld op TTL<BR>
> - Voor zo ver ik kan zien zijn de verbindingen naar de OM32 in<BR>
> overeenstemming met de handleiding.<BR>
> - ik heb inmiddels een en ander ook met koploper geprobeerd...<BR>
<BR>
Heb je de laatste versie van de handleiding OM32 SDIM (1.3 30 januari 2005)?<BR>
In een oudere versie stond namelijk een fout bij het aansluitschema.<BR>
De OM32 receive lijn moet in elk geval op pin 2 van K3<BR>
<BR>
Leon<BR>
<BR>
<BR>
<BR>
<BR>
To unsubscribe from this group, send an email to:<BR>
mailto://dinamousers-unsubscribe@yahoogroups.com<BR>
<BR>
<BR>
Yahoo! Groups Links<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
</tt>

<! |**|begin egp html banner|**| >

<br><br>
<tt>
To unsubscribe from this group, send an email to:<BR>
mailto://dinamousers-unsubscribe@yahoogroups.com<BR>
<BR>
</tt>
<br><br>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
<tt>YAHOO! GROUPS LINKS</tt>
</div>
<br>
<ul>
<tt><li type=square> Visit your group "dinamousers" on the web.<br> </tt>
<tt><li type=square> To unsubscribe from this group, send an email to:<br> dinamousers-unsubscribe@yahoogroups.com<br> </tt>
<tt><li type=square> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.</tt>
</ul>
<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
</div>
</br>

<! |**|end egp html banner|**| >

</body></html>

Baisc dinamo vraagje...

lvperlo · 2009-11-03 00:13 UTC

Original sent date : Fri Sep 23 02:23:30 CEST 2005
<html><body>

<tt>
Johan,<BR>
<BR>
> Ik gebruik de juiste handleiding. Echter doe ik het via de oplossing <BR>
> op pag<BR>
> 8. Ik gebruik k3 dus niet maar K1.<BR>
<BR>
Ik bedoel K3 van de RM51. Heb je daar pin 2 gebruikt voor het aansluiten <BR>
van de Tx draad naar de OM32?<BR>
Heb je wel communicatie met TM51 modules die aan de RM51 zitten?<BR>
Heb je getest of de communicatie met de RM51 echt werkt, bv met DinaStat?<BR>
<BR>
Leon<BR>
<BR>
</tt>

<! |**|begin egp html banner|**| >

<br><br>
<tt>
To unsubscribe from this group, send an email to:<BR>
mailto://dinamousers-unsubscribe@yahoogroups.com<BR>
<BR>
</tt>
<br><br>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br><br>
<div style="width:500px; text-align:right; margin-bottom:1px; color:#909090;">
<tt>SPONSORED LINKS</tt>
</div>
<table bgcolor=#e0ecee cellspacing="13" cellpadding="0" width=500px>
<tr valign=top>
<td style="width:25%;">
<tt>Lionel model train</tt>
</td>
<td style="width:25%;">
<tt>European model trains</tt>
</td>
<td style="width:25%;">
<tt>Model trains</tt>
</td>
</tr>
<tr valign=top>
<td style="width:25%;">
<tt>Model railroads</tt>
</td>
<td style="width:25%;">
<tt>Ho scale model train</tt>
</td>
<td style="width:25%;">
<tt>Model train n scale</tt>
</td>
</tr>
</tr>
</table>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
<tt>YAHOO! GROUPS LINKS</tt>
</div>
<br>
<ul>
<tt><li type=square> Visit your group "dinamousers" on the web.<br> </tt>
<tt><li type=square> To unsubscribe from this group, send an email to:<br> dinamousers-unsubscribe@yahoogroups.com<br> </tt>
<tt><li type=square> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.</tt>
</ul>
<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
</div>
</br>

<! |**|end egp html banner|**| >

</body></html>

Baisc dinamo vraagje...

jahoojoop <johan_korten@solcon.nl> · 2009-11-03 00:13 UTC

Original sent date : Sat Sep 24 14:41:40 CEST 2005
<html><body>

<tt>
--- In dinamousers@yahoogroups.com, Leon van Perlo <leon@v...> wrote:<BR>
> Johan,<BR>
> <BR>
> > Ik gebruik de juiste handleiding. Echter doe ik het via de oplossing <BR>
> > op pag<BR>
> > 8. Ik gebruik k3 dus niet maar K1.<BR>
> <BR>
> Ik bedoel K3 van de RM51. Heb je daar pin 2 gebruikt voor het<BR>
aansluiten <BR>
> van de Tx draad naar de OM32?<BR>
> Heb je wel communicatie met TM51 modules die aan de RM51 zitten?<BR>
> Heb je getest of de communicatie met de RM51 echt werkt, bv met<BR>
DinaStat?<BR>
K3 is de 9-pol female connector niet waar? Die gebruik ik idd.<BR>
DinaStat meldt alles op de juiste zijze terug:<BR>
<BR>
Using communication port COM2 at 19200bps<BR>
DINAMO is on-line<BR>
FAULT Status Active<BR>
Version = 2.20<BR>
SW1 = On<BR>
SW2 = Off<BR>
SW3 = Off<BR>
SW4 = On<BR>
RM51 remaining capacity = 91<BR>
TM510..7 = Not present (verkort)<BR>
<BR>
Hoe kan ik met DinaWin een bericht zenden wat effect heeft op de OM32?<BR>
Ik heb de dipswitch van de om32 op 0111 staan, dus adres 1, snelheid 19200<BR>
ik heb twee leds aangesloten tussen q0 en q1 (dan weet ik zeker dat de<BR>
anode en kathode van een van beide led's goed zit) in bijbehorende<BR>
weerstandbank zitten losse weerstanden van rood/rood/bruin dus 220 Ohm<BR>
> <BR>
> Leon<BR>
<BR>
<BR>
<BR>
</tt>

<! |**|begin egp html banner|**| >

<br><br>
<tt>
To unsubscribe from this group, send an email to:<BR>
mailto://dinamousers-unsubscribe@yahoogroups.com<BR>
<BR>
</tt>
<br><br>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
<tt>YAHOO! GROUPS LINKS</tt>
</div>
<br>
<ul>
<tt><li type=square> Visit your group "dinamousers" on the web.<br> </tt>
<tt><li type=square> To unsubscribe from this group, send an email to:<br> dinamousers-unsubscribe@yahoogroups.com<br> </tt>
<tt><li type=square> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.</tt>
</ul>
<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
</div>
</br>

<! |**|end egp html banner|**| >

</body></html>

Baisc dinamo vraagje...

lvperlo · 2009-11-03 00:13 UTC

Original sent date : Sat Sep 24 21:10:02 CEST 2005
<html><body>

<tt>
Hallo Johan,<BR>
<BR>
> K3 is de 9-pol female connector niet waar?<BR>
<BR>
Klopt.<BR>
<BR>
> Die gebruik ik idd.<BR>
<BR>
En dan pin 2 hoop ik,. In oude documentatie heeft namelijk ooit pin 3 <BR>
gestaan (is dus fout).<BR>
<BR>
> DinaStat meldt alles op de juiste zijze terug:<BR>
><BR>
> Using communication port COM2 at 19200bps<BR>
> DINAMO is on-line<BR>
> FAULT Status Active<BR>
> Version = 2.20<BR>
> SW1 = On<BR>
> SW2 = Off<BR>
> SW3 = Off<BR>
> SW4 = On<BR>
> RM51 remaining capacity = 91<BR>
> TM510..7 = Not present (verkort)<BR>
<BR>
Lijkt ok.<BR>
<BR>
> Hoe kan ik met DinaWin een bericht zenden wat effect heeft op de OM32?<BR>
<BR>
Download eens het dinamo commando overzicht in files->extra <BR>
documentatie  op yahoogroups.<BR>
<BR>
Kort:<BR>
  # 0 <module>  <adres>  = stel de OM32 uitgang in voor het volgende <BR>
commando<BR>
  # 1 <commando> <parameter> = geef commando<BR>
commando 8, parameter 0 = reset uitgang<BR>
commando 9, parameter 0 = set uitgang<BR>
<BR>
> Ik heb de dipswitch van de om32 op 0111 staan, dus adres 1, snelheid 19200<BR>
<BR>
Bedoel je met 0111 : 1, 2, 3, 4 = off, on, on, on, dan ok<BR>
Bedoel je met 0111 : 1, 2, 3, 4 = on, off, off, off, (want dat is het <BR>
namelijk hardwarematig) dan fout<BR>
<BR>
Mvg,<BR>
    Leon<BR>
</tt>

<! |**|begin egp html banner|**| >

<br><br>
<tt>
To unsubscribe from this group, send an email to:<BR>
mailto://dinamousers-unsubscribe@yahoogroups.com<BR>
<BR>
</tt>
<br><br>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br><br>
<div style="width:500px; text-align:right; margin-bottom:1px; color:#909090;">
<tt>SPONSORED LINKS</tt>
</div>
<table bgcolor=#e0ecee cellspacing="13" cellpadding="0" width=500px>
<tr valign=top>
<td style="width:25%;">
<tt>Lionel model train</tt>
</td>
<td style="width:25%;">
<tt>European model trains</tt>
</td>
<td style="width:25%;">
<tt>Model trains</tt>
</td>
</tr>
<tr valign=top>
<td style="width:25%;">
<tt>Model railroads</tt>
</td>
<td style="width:25%;">
<tt>Ho scale model train</tt>
</td>
<td style="width:25%;">
<tt>Model train n scale</tt>
</td>
</tr>
</tr>
</table>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
<tt>YAHOO! GROUPS LINKS</tt>
</div>
<br>
<ul>
<tt><li type=square> Visit your group "dinamousers" on the web.<br> </tt>
<tt><li type=square> To unsubscribe from this group, send an email to:<br> dinamousers-unsubscribe@yahoogroups.com<br> </tt>
<tt><li type=square> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.</tt>
</ul>
<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
</div>
</br>

<! |**|end egp html banner|**| >

</body></html>

Baisc dinamo vraagje...

"J.A. Korten" <johan_korten@solcon.nl> · 2009-11-03 00:13 UTC

Original sent date : Sat Sep 24 21:58:54 CEST 2005
<html><body>

<tt>
Hij zit idd op pin 2 van de RM51. Ik gaeens ff de commando's er op afvuren.<BR>
En ik ben informaticus, dus 0111 is off on on on<BR>
<BR>
Groeten Johan <BR>
<BR>
<BR>
</tt>

<! |**|begin egp html banner|**| >

<br><br>
<tt>
To unsubscribe from this group, send an email to:<BR>
mailto://dinamousers-unsubscribe@yahoogroups.com<BR>
<BR>
</tt>
<br><br>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br><br>
<div style="width:500px; text-align:right; margin-bottom:1px; color:#909090;">
<tt>SPONSORED LINKS</tt>
</div>
<table bgcolor=#e0ecee cellspacing="13" cellpadding="0" width=500px>
<tr valign=top>
<td style="width:25%;">
<tt>Lionel model train</tt>
</td>
<td style="width:25%;">
<tt>European model trains</tt>
</td>
<td style="width:25%;">
<tt>Model trains</tt>
</td>
</tr>
<tr valign=top>
<td style="width:25%;">
<tt>Model railroads</tt>
</td>
<td style="width:25%;">
<tt>Ho scale model train</tt>
</td>
<td style="width:25%;">
<tt>Model train n scale</tt>
</td>
</tr>
</tr>
</table>

<! |**|end egp html banner|**| >

<! |**|begin egp html banner|**| >

<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
<tt>YAHOO! GROUPS LINKS</tt>
</div>
<br>
<ul>
<tt><li type=square> Visit your group "dinamousers" on the web.<br> </tt>
<tt><li type=square> To unsubscribe from this group, send an email to:<br> dinamousers-unsubscribe@yahoogroups.com<br> </tt>
<tt><li type=square> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.</tt>
</ul>
<br>
<div style="text-align:center; color:#909090; width:500px;">
<hr style="border-bottom:1px; width:500px; text-align:left;">
</div>
</br>

<! |**|end egp html banner|**| >

</body></html>