Loading...
 

DinaSys


DTS-config voor iMac 64 bits

Hallo Leon,
Mijn versie van DTS-config voor Mac is niet meer compatible met de huidige 64-bits besturingssystemen van Apple. Ik werk nu met MacOS 11.2.3.
Is er een 64 bits-versie beschikbaar of in de maak?
groeten,
aad

Als de vertaling slecht is, geef dan Google translate vanuit het Engels de schuld! Ik heb dezelfde uitdaging en het antwoord is er nog niet. Omdat PiCommit de broncode niet heeft geleverd, wordt de configuratiesoftware helemaal opnieuw geschreven. Ik draai Mojave op een virtuele machine en de software werkt goed. Ik hoop dat dit nuttig is.

Hallo
By Google translate, orignal text below

Ik ben nieuw op dit forum dus ik hoop dat mijn post hier op de goede plek staat.
Ik heb een 6 jaar oude DTC-draaitafel en zijn Config-SW voor Mac van PiCommIT. Nu moest ik mijn oude MacBook inruilen voor een iMac Big Sur en M1-processor. Nu kan ik de oude Config-SW niet installeren op de nieuwe iMac M1. Mijn vragen zijn:

Bestaat er een nieuwe Config-SW voor iMac M1? Waar kan ik het vinden om te downloaden?
Komt de DTCv1-firmware 3.0 build 19 overeen met de vereisten voor iMac M1? Zo ja, waar kan ik het vinden om te downloaden?

Met vriendelijke groet
Norbert

Hallo
I am new in this forum so I hope that my post is here in the right place.
I have a 6 years old DTC Turntable and his Config-SW for Mac from PiCommIT. Now I had to exchange my old MacBook with an iMac Big Sur and M1 processor. Now I can't install the old Config-SW on the new iMac M1. My questions are:

Does a new Config-SW for iMac M1 exist? Where can I find it for download?
Does the DTCv1 firmware 3.0 build 19 match the requirements for iMac M1? If yes, where can I find it for download?

Best regards
Norbert

Hallo
By Google translate, orignal text below

Gisteren heb ik de DTS-config 6.0 Beta 1.1 gedownload en geïnstalleerd op een iMac 24” met een Apple M1-processor. Er waren geen andere problemen. Alles werkte prima.

Maar nu heb ik nog 2 punten die me storen:
1. Er ontbreekt een afbeelding in het DTCnewconfig.app-pictogram. Het zou leuk zijn als er een was.
2. De knop "Sensortest" laat de app crashen. Waar is deze knop nu voor?

Hallo
Yesterday I downloaded the DTS-config 6.0 Beta 1.1 and installed it on an iMac 24 ”with an Apple M1 processor. There were no other problems. All worked fine.

But now I still have 2 points that bother me:
1. A picture is missing in the DTCnewconfig.app icon. It would be nice if there was one.
2. The “Sensor Test” button crashes the app. What is this button for now?

Best regards
Norbert


Netherlands

Hallo Norbert (e.a.)

Er staat inmiddels een nieuwe DTCnewConfig 1.0 Build 1
De "Sensor Test" button laat zien welke sensors nu actief zijn (rood) en welke sensors actief zijn geweest sinds het starten van de test (groen). "Sensor Reset" stopt de test en maakt alles weer zwart. Is vooral bedoeld om een DTS snel te kunnen testen, maar ook als er iets niet werkt kan het handig zijn om te kijken of er sensors blijven hangen of worden overgeslagen. Kan ook handig zijn om de DTS goed uit te lijnen.
Het probleem dat Norbert meldt dat de "Sensor Test" button de app laat crashen herken ik niet. Niet in de Windows noch in de Mac versie. Als dit bij iemand reproduceerbaar is graag info over welke DTC met welke firmware je gebruikt.
Ja, een icon moet ik nog bedenken en maken. Nog niet aan toegekomen.

Met hartelijke groeten, Leon

Hi Norbert (e.a.)

There is now a new DTCnewConfig 1.0 Build 1
The "Sensor Test" button shows which sensors are now active (red) and which sensors have been active since the start of the test (green). "Sensor Reset" stops the test and makes everything black again. Is mainly intended to be able to quickly test a DTS, but also if something does not work it can be useful to see if sensors are stuck or skipped. It may also help to align the DTS.
I don't recognize the problem that Norbert reports that the "Sensor Test" button causes the app to crash. Not in the Windows nor in the Mac version. If this can be reproduced by someone, please provide information about which DTC with which firmware you are using.
Yes, I still have to think of and make an icon. Not got around to it yet.

Best regards, Leon

hallo Leon,
fijn dat je nu een complete versie hebt gemaakt. Echter, ik kan de app op geen enkele wijze openen op mijn iMac met MacOS 11.6. De vorige (Beta) versie kon ik wel openen en gebruiken. Alle mogelijke trucs om de beveiliging tegen onbekende software heb ik inmiddels geprobeerd, maar zonder resultaat. De melding blijft hardnekkig "Je hebt geen toestemming om de app DTCnewconfig te openen"
heb jij de oplossing?
alvast bedankt.
groeten,
Aad

Hallo

Aangezien ik ook een iMac met M1-chip en OSX 11.6 heb, zal ik morgen de laatste DTC newConfig downloaden en dan vertellen wat er gebeurt.

Hallo
As I have also an iMac with M1 chip and OSX 11.6, tomorow I will download the last DTCnewConfig and then relate what happens.

Norbert


Hallo Leon

Ik kan de verklaring van Aad bevestigen. Als ik DTCnewConfig 1.0 Build 1 start, krijg ik dezelfde melding: "U heeft geen toestemming om de toepassing te openen". Ik heb dit probleem niet met DTCnewConfig 6.0 Beta 1.1.
De pc is een iMac 24" met M1-chip en OSX 11.6"

I can confirm Aad's statement. When I start DTCnewConfig 1.0 Build 1 I get the same message: "You do not have permission to open the application". I don't have this problem with DTCnewConfig 6.0 Beta 1.1.
The PC is an iMac 24 "with M1 chip and OSX 11.6

Norbert


Hallo Leon

Met DTC-Config 6.0 Beta 1.1 heb ik een probleem met de knop "Sensortest". Na het activeren van "Sensor Test" verandert het in "Sensor Res" en gebeurt er verder niets. Er wordt ook geen nieuw venster geopend.
Als ik na een langere wachttijd (2-3 minuten) op de knop "Sensor RES" druk, krijg ik de melding: "Geen reactie van DTC." En de USB-verbinding is gesloten.
Om met het programma verder te kunnen werken, moet ik de interface opnieuw selecteren en met "connect" herstellen. Dan kan ik de DTC weer aansturen.
Alles getest met:
DTC--Config 6.0 Beta 1.1
Sytem Version 3.00 Build 17
iMac 24" Apple Chip M1
MacOS Big Sur 11.6


With DTC-Config 6.0 Beta 1.1 I have a problem with the "Sensor Test" button. After activating "Sensor Test" it changes to "Sensor Res" and nothing else happens. No new window will open either.
If I press the button "Sensor RES" after a longer waiting period (2-3 minutes) I get the message: "No response from DTC." And the USB connection is closed.
In order to be able to continue working with the program, I have to reselect the interface again and restore it with "connect". Then I can control the DTC again.
Everything tested with:
DTC--Config 6.0 Beta 1.1
Sytem Version 3.00 Build 17
iMac 24" Apple Chip M1
MacOS Big Sur 11.6

Norbert

in aansluiting op mijn mail van gister vul ik nog aan dat mijn iMac van 2019 is met een intel processor met macOS 11.6 geïnstalleerd.

Hallo

Google translate:
Is er al nieuws over de kwestie sinds oktober 2021? Of is er een update beschikbaar om te downloaden?

Is there any news on the issue since October 2021? Or is there an update available for download?

DTC--Config 6.0 Beta 1.1
Sytem Version 3.00 Build 17
iMac 24" Apple Chip M1
MacOS Monterey 12.1

Norbert


 
Dutch (Nederlands, nl)English British (British English, en-uk)German (Deutsch, de)